Blowers (Turbo High Speed) – TNE Global

Comprehensive Energy Solutions with Turbo Technology

Through years of experience with specialty in turbo technology, TNE Global was established to devise solutions for reducing energy consumption in every kind of industry with reliable and affordable products and impeccable services. TNE cares about the environment and saving energy to conserve the earth’s resources, and working relentlessly towards the well-being of our next generation.

TNE Turbo Blowers are uniquely engineered with:

  • Full three-dimensional back-swept impeller design offering unrivaled efficiency in the same class, comparable to the efficiency of medium/large size turbo blower
  • Ultra-high speed high efficiency air-cooled permanent-magnet synchronous motor delivering up to 100,000RPM for high pressure Turbo Blower applications, up to 250kPa,g (35 PSIG)
  • Robust rotor design supporting the optimum aerodynamic performance with direct-drive by high speed PMSM (max. 100,000 RPM)
ATB ALL AROUND TURBO BLOWER
ALL-AROUND TURBO BLOWER (ATB)
The ATB lightweight air-bearing high efficiency turbo blower has been specially designed to offer hassle free operation.
AMBIENT CONDITIONS
Temperature -10 ~ 40 deg. C, Relative Humidity 0-100%
INSTALLATION AND GROUND WORK
Leveling by Level Adjuster / Anchoring (optional)
MAX DISCHARGE PRESSURE
40kPa,g (6PSIG) @Sea Level Static Condition
AIREND/IMPELLER
Single Stage / Centrifugal
MOTOR TYPE
High-Speed PMSM (Permanent Magnet Synchronous Motor)
BEARING
Air Foil Bearing
SPEED CONTROL
Variable Frequency Drive (VFD)
INPUT POWER
380-480V, 50-60 Hz, 3Ph
RATED MOTOR POWER
8~55 kW
SUCTION INLET
Louvered Inlet (Piped Inlet optional)
NOISE LEVEL
Below 80+/-2 dB(A)
CTB Compact Turbo
COMPACT TURBO BLOWER (CTB)
The CTB has been specifically designed for installations requiring flexibility in a lightweight turbo blower with a small footprint.
AMBIENT CONDITIONS
Temperature -10 ~ 40 deg. C, Relative Humidity 0-100%
INSTALLATION AND GROUND WORK
Leveling by Level Adjuster / Anchoring (optional)
MAX DISCHARGE PRESSURE
250kPa,g (36 PSIG) @Sea Level Static Condition
AIREND/IMPELLER
Single Stage / Centrifugal
MOTOR TYPE
High-Speed PMSM (Permanent Magnet Synchronous Motor)
BEARING
Bump type Air Foil Bearing
SPEED CONTROL
Variable Frequency Drive (VFD)
INPUT POWER
380-480V, 50-60 Hz, 3Ph
RATED MOTOR POWER
11~37kW
SUCTION INLET
Louvered Inlet (Piped Inlet optional)
NOISE LEVEL
Below 80+/-2 dB(A)
REMOTE CONTROL AND MONITORING
Hard Wiring (Communication optional)
PROTECTION (OPTIONAL)
IP54/IP53 or equivalent
STB1 Standard Turbo
STANDARD TURBO BLOWER (STB)
The STB is a high-efficiency turbo blower featuring an optimized module for turn down.
AMBIENT CONDITIONS
Temperature -10 ~ 40 deg. C, Relative Humidity 0-100%
INSTALLATION AND GROUND WORK
Leveling by Level Adjuster / Anchoring (optional)
AIREND/IMPELLER
Single Stage / Centrifugal
MOTOR TYPE
High-Speed PMSM (Permanent Magnet Synchronous Motor)
BEARING
Air Foil Bearing
SPEED CONTROL
Variable Frequency Drive (VFD)
INPUT POWER
380-480V, 50-60 Hz, 3Ph
RATED MOTOR POWER
45~115kW
SUCTION INLET
Louvered Inlet (Piped Inlet optional)
NOISE LEVEL
Below 80+/-2 dB(A)
REMOTE CONTROL AND MONITORING
Ethernet/Modbus/Profibus
MTB MULTI CORE PACKAGE TURBO
MUTI-CORE TURBO BLOWER (MTB)
The MTB’s built-in back up system with an independent operation mode for each core enables the turbo blower to operate the system continuously despite a single core failure.
AMBIENT CONDITIONS
Temperature -10 ~ 40 deg. C, Relative Humidity 0-100%
INSTALLATION AND GROUND WORK
Leveling by Level Adjuster / Anchoring (optional)
AIREND/IMPELLER
Single Stage / Centrifugal
MOTOR TYPE
High-Speed PMSM (Permanent Magnet Synchronous Motor)
BEARING
Air Foil Bearing
SPEED CONTROL
Variable Frequency Drive (VFD)
INPUT POWER
380-480V, 50-60 Hz, 3Ph
RATED MOTOR POWER
150~920kW
MATERIAL
Aluminum Alloy, Inconel Alloy, Steel
LUBRICANTS
Not applicable
SUCTION INLET
Louvered Inlet (Piped Inlet optional)
NOISE LEVEL
Below 80+/-2 dB(A)
REMOTE CONTROL AND MONITORING
Ethernet/Modbus/Profibus

Warning: count(): Parameter must be an array or an object that implements Countable in /home/trilliu1/public_html/acg-envirocan.ca/wp-content/themes/acg/single-products.php on line 92