Aqua-Aerobic Systems provides two types of Aqua MultiBore® membranes, polymeric and ceramic. The type of membrane used in an application is dependent on waste characteristics, treatment objectives and the best economic solution for the plant.
Polymeric and Ceramic Membranes
Aqua MultiBore® P-Series Polymeric Membranes
The Aqua MultiBore polymeric membrane has been successfully applied in both water and wastewater including high solids applications.
Benefits
- Less chemical usage
- High water recover rate
- Low energy consumption
- High Permeability
- No basins or lifting equipment required
- Simple operation and low maintenance
Features & Specifications
- Large diameter bores
- 0.02 μ UF membrane is rated for 4 log virus removal
- Each fiber is made from one material in a single process
- Inside-outside flow path requires no air scour
- Low fouling, can be cleaned with wide pH range (1-13)
- Superior strength – No fiber breaks!
Aqua MultiBore® C-Series Ceramic Membranes
The Aqua MultiBore® C-Series ceramic membranes have been successfully applied in both water and wastewater applications with more than 140 installed systems from pretreatment to advanced treatment of drinking water.
Benefits
- Less chemical usage
- High water recover rate
- Low energy consumption
- High Permeability
- No basins or lifting equipment required
- Simple operation and low maintenance
Features & Specifications
- Membrane is constructed with very uniform 0.1 μ pores resulting in high fluxes
- Each ceramic membrane is made from one material in a single process
- Inside-outside flow path
- Resistant to pressure, heat and corrosion
- High mechanical strength – No membrane breaks!
- Low environmental impact – used membranes can be recycled
- Backwashed with a short blast of filtrate and air, resulting in very high recoveries
