Screen (Multiple Rake for Low Flows)
No Lower Sprockets, Bearings, or Tracks to Foul or Jam
Adapts to a Range of Debris Variations
Tear-Shaped Bars are 20% to 50% More Efficient
A front-clean, front-return, mechanically cleaned bar screen technology
Specifically designed for plants of 1 MGD or less average flow with channels 2 feet to 6 feet deep by 1 foot to 2 feet wide.
Bar openings of 1/4 inch, 1/2 inch, 3/4 inch, and 1 inch are available
Low Maintenance
With no lower sprocket, FlexRake® technology allows all maintenance to be performed from the deck; no jam points underwater to require diving or confined space entry. No scheduled lubrication or maintenance is necessary.
Pre-Engineered
Integral enclosure, spray bar, and all stainless steel construction. Simple control system available.
UHMW Low Flow SmartLink™ Technology
The corrosion-resistant multifunctional links provide long operation life and permit “dry” operation.
Energy Efficient
The low horsepower requirements of the Sumitomo drive ensure a low-cost, energy-efficient method of debris removal.
Efficient Hydrodynamics
Depending on approach velocities, tear-shaped bars are 20% to 50% more efficient.
General
Average Flow Capacity: | 1 MGD |
Peak Flow Capacity: | 4 MGD |
Channel Width: | 1 -2 ft wide nominal |
Maximum Liquid Level: | 22” |
Screen Area: | 3.5 ft (vertical projection) |
Bar Opening: | 1/4″, ½”, ¾”, 1” |
Range of Channel Depth: | 2’ to 6’ |
Minimum Water Depth: | 0” |
Discharge Height: | 32.5” as measured from deck (max) |
Unit Height: | 65.5” as measured from deck |
Unit OAL Width: | 41.5” measured at widest point |
Lifting Capacity: | 500 lb |
Utility
1 Phase: | (115 volt or 230 volt) |
3 Phase: | (240 volt or 480 volt) |
Performance
Discharge Rate / Cleaning: | Every 24.7 seconds |
Scraper Travel Speed: | 50.5”/minute |
Materials of Construction
Drive Mechanics: | 304 Stainless Steel |
Enclosure/Dead Plate: | 304 Stainless Steel |
Screen Bars: | 316 Stainless Steel |
Chain/Scrapers: | UHMW-PE – UV Stable |
Motor: | Steel with Std DC Coatings |
Standard Materials of Construction
Standard: | 304 Stainless Steel |
Available in: | 316 Stainless Steel |
Controls Functionality
Emergency Stop
On/Off
Run Monitoring (Dry Contact)
Explosion-Proof Controls Available*
*Custom site wiring is necessary with explosion-proof option. Main panel is remote mounted, explosion-proof motor and NEMA 7/9 push button station provided. Wiring completed per local requirements.